Izdelki za jeklena jekla (434)

Pvc Column Pipes Light Series

Pipe Threads (trapezoid)

HASSPIPE produces a high quality range of PVC-U well casings and screens strictly in accordance with the Standard TS 11794 and ISO standarts, class I, II and III. The standard TS 11794 and ISO applies as well for raw materials and workmanship of pipes used in the manufacture of the casing and screen. There are three basic ranges - a standard range for shallow, medium well depth and a heavy duty, thick walled range for greater well depths. The casing and screens are made from 100% virgin unplasticized poly vinyl chloride compound and are coloured grey. They are supplied with a male pipe thread at the spigot end and a female pipe thread at the socket end. No re-worked material is used. The pipe is produced under ISO 9001:9002 Quality Management System. Screens can be supplied with either a plain or filtered surface. Slots are arranged vertically to improve the mechanical strenght of the screens and are designed to give open areas ranging Materials:PVC-U Slot Sizes:Available slot width 2.0 mm

Additional Parts - PVC DRILLING PIPES

There are many different methods in the cutting process using lasers and bending which are used to cut or bend different materials into different shapes.

Hoistong Plug

Characteristic Features : Can read high-hardness easily compared to 7010. High fatigue strength, including in adhesive, rivet, screws is suggested, using with protectors in outer environments is suggested. Warnings : Be careful while selecting heat treating Product Shapes: plate, bar, roll, pipe, wire, profile types

It is the quality with the best malleability feature among the austenitics. Its malleability capability is around 78% and it is named as the automat of stainless steel. Although the sulfur (S) addition improves its malleability, it also reduces corrosion resistance (lower than 304) and weakens its formability, it is especially not suitable for straight bending. Despite sulfur, its toughness degree is the same as 304

310 quality is designed to withstand high temperature service. Despite this feature, material softness and weldability are quite good. It can operate continuously at 1150 degrees and does not rust. It can operate intermittently at 1040 degrees. Like other austenitic grades, it has excellent toughness. The 310S quality is resistant to high temperatures both in moist and dry environments. The low carbon content of the 310S allows it to withstand temperatures less than 310 does.

It is the general name of the placement aimed at improving the mechanical properties of heat treatment metals. A type of metallurgical process. Generally, it is done by annealing metals in a certain way, bringing their structure to the desired stage.

Dabei handelt es sich um eine Art Sandstrahlmaschine, bei der der Sandstrahlvorgang mit den Turbinen in einer Reihe auf einer Seite durchgeführt wird, während sie durch das automatische Aufhängungssystem der Maschine gedreht werden, nachdem sie in den Hängekörben auf dem Werkstück platziert wurden. Es wird bevorzugt in der Metallverarbeitung und bei der Revision von Ersatzteilen eingesetzt. Die Maschine kann entsprechend den Bedürfnissen und Anforderungen optimiert werden.

The gear and gearbox manufacturing sector plays an important role in the operation of industrial machinery. Baca Makine, carefully manufactures the most suitable part to make the machine parts compatible and ensure the correct transfer of energy

BRONZE (RED) PRODUCTS Specific Weight: 8-9 Bronze bushings are manufactured with centrifuging and sand casting method. They are used in bearing, bush and gear production. They increase life-span of the machinery. They minimize the malfunctioning and maintenance.

Seyyar olarak kullanılabilen basınçlı kumlama kazanları bir operatör tarafından yönetilebilen, açık alanlarda operatörün yanında rahatça bulundurabildiği kumlama makinesi türüdür. Seyyar kumlama makineleri her türlü granül ile kumlama kabiliyetine sahip olup uzaktan pnömatik tetik ile kontrol edilmektedir. Geniş parçaların, araçların, çelik konstrüksiyonların kumlanmasında tercih edilir.

420 quality stainless steel can be hardened by many heat treatments like high carbon steel. It contains at least 12% chromium (Cr) and this alloy is sufficient for corrosion resistance. It has good softness in annealed condition, but it has the ability to get 50 Rockwell hardness by heat treatment. For best corrosion resistance it must be hardened and gets it surface cleaned or polished.

Pvc Well Casing & Screen Pipes 500 m Depth

It is a material with high stretching resistant to sea water and corrosion. Under heavy load and at bearings and bushings with low speed, at gears which operates in pumps and turbine wheels and requiring high strength.

* Estetik dizayn * Kolay katlanır * Elektrostatik toz boya * Paslanmaz kir tutmaz

304 quality is the most commonly, and in a versatile way, used stainless steel in the world. It has ability to be perfectly shaped and welding capability. Austenitic structure of 304 provides to perform deep drawing without intermediate annealing, and therefore, it is preferred in manufacturing which requires deep drawing such as sink, natural gas chimneys and saucepan. It can be used for various purposes in sectors such as industry, architecture, transportation.

Dairesel kaynak makineler kaynaklı imalat sektöründe çok geniş kullanım alanına sahip olup, yüksek kalite, minimum çarpılma için dairesel kesitli parçaların uç uca, köşe, üst üste bindirmeli ve iç içe geçmeli kaynak konfigürasyonlarda çok iyi sonuçlar alınmaktadır. Bu makinelerde dıştan dairesel kaynaklı birleştirmeler yapılmaktadır. Tek ve çok pasolu kaynak, TIG, MIG/MAG ve SAW kaynak sistemleri kullanmak mümkündür. Kaynak yapılacak birleşim yeri kaymayacak şekilde sıkılır ve kaynak kafası hassas bir şekilde dönen iş parçası üzerinde sabit kalarak kaynak yapmış olur. Dairesel kaynak makineleri standart olarak çift torç mekanizmalı üretimi yapılmaktadır ancak tek veya daha fazla torç mekanizmalarının da adapte edilmesi mümkündür. Standart olarak dairesel kaynak makinesi 1000mm ile 6000mm arasında, çap olarak 1000mm ye kadar üretimi yapılmaktadır

ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions.

* Buharı geçirebilen monoblock sac tablo *Ayar kolu sayesinde 60-90cm yükseklik ayarı *Komple fırınlanmış elektrostatik boyalıdır *Isıya dayanıklı renkli pamuklu kumaş, Lüks keçe, *Yanmaz silikonlu ütülük TSE’li fiş ve kablo 100cm

AISI630 quality stainless steel is a type of steel that is rapidly used in the world since it has high mechanical strength, high hardness and good price-performance ratio. AISI 630 quality stainless is commonly used in pump and valve shafts, kitchen utensils, petrochemical industry, chemical plants and places with stainless steel decoration materials. Defense industry is one of the most widely area of use of 1.4542, that`s also named as PH 17-4, stainless quality. This stainless steel material, which is preferred in the defense industry in our country, is frequently used due its high level of mechanical values and long life

* Buharı geçirebilen monoblock sac tablo * Ayar kolu sayesinde 60-90cm yükseklik ayarı * Komple fırınlanmış elektrostatik boyalıdır * Isıya dayanıklı renkli pamuklu kumaş, Lüks keçe, * Lüks kurutmalık, * Plastik askı asma aparatı, * Yanmaz silikonlu ütülük, TSE’li fis ve kablo 140cm

Sulu kumlama makinası; civatalar dahil olmak üzere tamamen paslanmaz çelikten imal edilen, kabin, su ve kum haznesi, su tutucu filtre regülatörü ve kumlama setinden oluşur. Kabin altında bulunan haznedeki karıştırıcı sürekli olarak kum ve suyun homojen olarak kalmasını sağlar. Pompa ve basınçlı hava ile su ve kum aynı anda tek nozuldan püskürtülür. Hassas metalleri ve kalıp kumlama için idealdir. Medikal sektöründe oldukça rağbet görmektedir.

Normalerweise sind Marmor, Basalt, Granit usw. Natursteine; Es handelt sich um eine Art Sandstrahlgerät, das zum Alterungs-, Anti-Rutsch- oder dekorativen Sandstrahlen verwendet wird. Sie wird Marmor-Sandstrahlmaschine genannt, da Marmor häufiger sandgestrahlt werden muss als andere Steine. Für das Sandstrahlen von Natursteinen kann es ohne Bedenken bevorzugt werden.

Please contact for more information

Tamburlu Kumlama makinesi, çok sayıda küçük ve orta boyutlu metal parçaların kumlanmasında kullanılan otomatik kumlama makinesidir. Parçaların birbirine temas ettiğinde zarar görmeyecek türde olması, hassas malzemeden üretilmiş olmaması gerekir. Bir çok sektörde Tamburlu kumlama makineleri tercih edilmektedir.

Laser cutting is a cutting method in which metal and non-metal materials with different material thicknesses are cut. The basis of the process is the directed, shaped and focused laser beam. By hitting the laser beam on the workpiece, the material is heated up to its melting or evaporation temperature

ENJECTİON:In a closed mold, after the plastic material is injected into the mold cavity at a high speed from the runner inlet at a temperature range above the melt temperature, after bringing the size and visual tolerances of the part to an acceptable level with the ironing phase and holding